|
|
|
Getting my rubber off !!! 4 Months, 2 Weeks ago
|
Karma: 0
|
|
Hiya all.
Has anyone got ant ideas of a good way of removing the rubber from a motorcycle helmet. I have tried masking it but the finish isn't as good as I would like.
Thanks
|
|
|
|
|
|
|
Ouch....I must be awake.
|
|
|
The administrator has disabled public write access. |
|
|
|
Re:Getting my rubber off !!! 4 Months, 2 Weeks ago
|
Karma: 0
|
|
Airbrush Action's June 1994 edition has an article by Jim Haney that addresses this issue. He basically uses a push-out utility knife to remove the trim. The article does not go into detail about how to reattach the trim, though.
|
|
|
|
|
|
|
The administrator has disabled public write access. |
|
|
|
Re:Getting my rubber off !!! 4 Months, 2 Weeks ago
|
Karma: 0
|
|
If you aren't getting good results with masking tape, you could also try a brush-on masking material. You could brush it on and overlap it onto the helmet a bit, and then go back with an X-Acto and remove the excess masking material. This masking method is better than trying to get tape to go around a curved surface, and you can mask much closer to the edge of the trim.
|
|
|
|
|
|
|
The administrator has disabled public write access. |
|
|
|
Re:Getting my rubber off !!! 4 Months, 1 Week ago
|
Karma: 0
|
|
Do you have any suggestions for a product?
|
|
|
|
|
|
|
Ouch....I must be awake.
|
|
|
The administrator has disabled public write access. |
|
|
|
Re:Getting my rubber off !!! 4 Months, 1 Week ago
|
Karma: 0
|
|
Liquid Frisket is the brush-on (liquid) product. It's a liquid that you brush on and let dry for a short time. When it dries, it creates a rubbery film where you brushed it on. This film can then be cut with an X-Acto knife to trim areas where you don't need it, or if you accidentally get some on a place where you want paint.
|
|
|
|
|
|
|
The administrator has disabled public write access. |
|
|
|
Re:Getting my rubber off !!! 4 Months, 1 Week ago
|
Karma: 0
|
|
You can get this stuff at several arts and crafts stores, and I think you should probably be able to get it somewhere like Coast Airbrush, Dixie Art Supply or other paint and airbrush supply store. Check on the _link_s page for _link_s to these types of stores.
|
|
|
|
|
|
|
Last Edit: 2008/08/29 01:34 By strmtrpr@charter.net.
|
|
|
The administrator has disabled public write access. |
|
Favoured: 0
